 |
Device Servers:
UDS-10B
 |
|
Features
- Flexible and well-developed IP protocol stack
- Support for RS232 or RS485 serial connections via
DB-25 serial port
- 10 Mb/s Ethernet through the RJ-45 connector
- 128-bit encryption for the maximum level of security
- Configurable via Internal Web server, SNMP, DHCP,
or Telnet
- Flash ROM for easy software upgrades
|
Tech
Specs
| Protocols
Supported |
ARP, UDP, TCP, Telnet, ICMP,
SNMP, DHCP, TFTP, and HTTP |
| Device
Support |
Supports any asynchronous serial device
with 7 or 8-bit data, with or without parity, requiring
Ethernet access |
| Network
Interface |
RJ45 (10BASE-T) Ethernet |
| Serial
Interface |
Female DB25 RS-232/RS485 serial port
with DCE configuration |
| Data
Rates |
Serial speeds 300 bps up to 115 Kbps |
| Flow
Control |
Software XON/XOFF
Hardware CTS/RTS |
| Modem
Controls |
RTS, CTS, DSR, DCD, DTR |
| Management |
Internal Web server
SNMP (read only)
Serial login
Telnet login |
| System
Firmware |
Flash ROM standard; downloadable from
a TCP/IP host (TFTP) or over the serial port |
| LEDs |
Good Link (green)
Network transmit/Receive data (yellow)
Collisions (red)
Diagnostic (red)
Status (green) |
Physical
Dimensions
(H x W x D) |
0.55 x 2.3 x 3.3 in
(1.4 x 5.8 x 8.4 cm)
Weight: 0.12 lbs (54 g) |
| Power
Requirements |
9-30 VDC 140 mA max.
(Power supply not included) |
| Environmental |
Operating Temperature
5 to 50°C (41 to 122°F)
Storage Temperature
-40 to 66°C (-40 to 151°F) |
|
|
