 |
PROFIBUS: PB-PC104
(Slave)
|
|
|
Features
- Designed to integrate embedded systems into a PROFIBUS
network
- Cost Effective and Easy to Use
- Optimized to run as a DP slave
- Highly reliable hardware platform
- No external copy protection
- Application Interface of PROFI104 is compatible
with all other SOFTING PROFIBUS Interfaces
- Downloadable software updates
- Documentation and support provided
Application
PROFI104 Slave is an
intelligent PC/104 board designed to integrate embedded
systems into a PROFIBUS network in a cost effective
and east to use way.
PROFI104 operates as
a full featured DP slave according to European standard
EN 50 170, part 2.
A sophisticated ASIC
(SPC3) performs ow level operaions designing the interface
for transfer rates up to 12 Mbit/s.The number of supported
I/O points is only limited by the ASIC, meaning the
performance of up to 244 byted input or output data
each.
|
Tech Specs
| Unit |
16-bit PC/104 compliant board
|
| CPU |
Siemens SAB-C165 Microprocessor
|
| Memory |
128-Kbyte Flash, 128 Kbyte SRAM, 4 Kbyte
dual port RAM
|
| Supported
PC Interrupts |
5,10,11,12,15, PC/104 interrupt sharingpossible
via jumper setting
|
| Profibus
ASIC |
Siemens SPC3
|
| Physical
Interface |
Galvanically isolated RS-485
|
|
Connector Type
|
9 pin Sub-d female
|
| Connector
Pinning |
EN 50 170, part 2 compliant
|
| Hardware
Configuration |
I/O address is set by a switch on the
board; all other settings via software
|
| Power
Supply |
+5 V (+-5%; typ. 600mA
|
| Transfer
Rate |
9.6KKbit/ up to 12 Mbit/s
|
| Temperature |
0-55C Operating temperature
|
Required Software (Depends on
Operating System) |
| Part Number |
Description |
| PROFI-DMK-NT
(Windows NT) |
PROFIBUS Application programming
Interface (PAPI);demo programs, PAPI user manual (English),
Windows NT driver |
| PB-DMK-DPS |
Profibus APplication Program
Interface (PAPI); demo programs; slave user manual |
Optional Software |
| Part Number |
Description |
| PB-TK-DPS |
Toolkit to develop customer
specific driver software consisting of PROFIBUS Application
Program Interface (PAPI); slave user manual (English/German);
DP-RAM structure (CMI-specification); PAPI source code
in C for MS-DOS |
|
