 |
CAN Interfaces: CAN-AC2
 |
|
Features
- ISA Technology
- Easy use and Cost Efficient
- Provide powerful interfacing of PC applications
to CAN-based networks
- Equipped with its own microprocessor
- Reduction of real time requirements of PC applications
- Provides two connections to two independent, opto-isolated
CAN-based networks
Application
The PC is increasingly
being used for controlling, operating and visualizing
automation and measurement applications. This
often requires connection of external periphery via
the CAN bus. CAN AC2 features ISA technology and is
suitable for easy and low cost interfacing of PC applications
to CAN based networks.
|
Tech Specs
| CAN Interfaces |
Separate network interfaces according
to CAN specification 2.0 A with CAN Controller 82C200,
optionally according to CAN specification 2.0 B with CAN
controller 82527 |
| Physical Interfaces |
Opto isolated CAN high speed interfaces
in accordance with ISO 11898 up to 1 Mbit/s or customer
specific via piggyback, D-sub 9-pin connectors according
to CiA ( CAN in AUtomation) standard |
| Microcontroller |
NEC V25+ 20Mhz ext. |
| Code/data memory |
128 Kbyte SRAM |
| PC Interface |
ISA< 8-bit interface, 64 Kbyte DPRAM |
| PC memory area for
DPRAM |
16 Kbytes or 64 Kbytes in the address
range D0000 to EFFFF (sellectable) |
| PC Interrupt |
IRQ 3,4,5,7,9 or unused |
| Dimensions |
Short plug in board, 100 x 160 mm |
| Temperature Range |
0-70C |
| EMC |
CE
conformity according to EN 55022:1994, class B, and
EN 50082-2: 1995 (residential and industrial area)
FCC
part 15, subpart B, limit B (residential and industrial
area)
|
|
|
